ARBOR-MAX 1/2" TREE CLIMBING ROPE
ARBOR-MAX 1/2" TREE CLIMBING ROPE
Arbor-Max tree climbing rope with blue and green tracers.
Arbor-Max arborist tree rope is made of a 16-carrier braided polyester cover with a nylon core. The sturdy construction makes this the ultimate tree rope for climbing and the diameter lends itself to an easy grasp.- Free US Shipping on Orders over $350 (Continental US only)
Compatible with
16-Strand cover consists of tightly-plied polyester surrounding nylon cores, significantly reducing weight without compromising firmness and roundness. High visibility cover yarns stands out in the workplace making it an ideal critical safety line. 1/2" Diameter Color: Green, Blue & White Highly resistant to abrasion, chemicals, sunlight, twisting and milking Excellent knot holding ability Works well when wet Single Braid construction Green / White / Blue color Suggested uses - Climbing or rigging
Breaking Strength, when new, is 6,000 lbs. Working Loads: No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.